PaceLadder

Strength plans · 8 weeks

Strength training workout plans

A strength training workout plan should fit the week you actually have, not the week a template assumes. Choose your goal, how many days you can train and what kit you can use, and PaceLadder builds the split, the movements and the progression around it.

This sample is built for general fitness, 2 days a week, with a full gym. It runs 8 weeks, uses two full body days, and peaks at 30 working sets in a week, with a deload every 4 weeks. Every session takes about 39 minutes.

Personalize this plan Free to start: the split, weekly sets and first two weeks

Split chooser

Choose a split by days

The days you can train decide the split. Start with the smallest week you will repeat, then add days when recovery allows.

DaysSplitBest forPlan
2Full bodyThe least time in the gym that still trains every muscle.Strength training plans
3Full bodyThe best starting point for a beginner.3 day split workout
3Push pull legsOne push, pull and leg day for lifters past the basics.Push pull legs routine
4Upper lowerEvery muscle twice a week with a day between sessions.4 day split workout
5Body part splitOne focus a day, for lifters who can recover from five sessions.Gym workout plan for men
5Push pull legs plus upper lowerMore volume for experienced lifters.5 day split workout
6Push pull legs twiceHigh frequency for advanced lifters with the time to recover.Push pull legs routine

The plan

Strength training workout plan: week by week

Beginner lifter, 2 days a week, two full body days, over 8 weeks.

8
weeks
2
days a week
30
sets in the peak week
39
minutes a session

Working sets by week

12345678
Working week Deload week

Volume in the peak week

Week 3
  • Chest3 of 12
  • Back6 of 12
  • Shoulders3 of 10
  • Quads6 of 12
  • Hamstrings6 of 10
  • Core6 of 8
General fitnessLinear loadDeload every 4 weeksTwo full body days
WeekBlockSessionsWorking setsFocus
1BuildFull body A, Full body B30Set your working weights and leave two reps in reserve on every set.
2BuildFull body A, Full body B30Add a small amount of weight to every working set.
3BuildFull body A, Full body B30Add a small amount of weight to every working set.
4DeloadFull body A, Full body B20Deload week: two sets per exercise at about 60% of your working weight.
5BuildFull body A, Full body B30New block: add a small amount of weight to the weights you finished the last block with.
6BuildFull body A, Full body B30Add a small amount of weight to every working set.
7BuildFull body A, Full body B30Add a small amount of weight to every working set.
8DeloadFull body A, Full body B20Deload week: two sets per exercise at about 60% of your working weight.

Sample week

Strength training workout plan: the peak week, day by day

Week 3 of 8, 30 working sets. Every session in your own plan comes with its sets, reps, rest and a technique cue.

Full body A

Full body
About 39 min
  1. Back squat

    3 × 8 to 12

    Rest 1 min 30 s · RPE 7, about 3 reps in reserve

    Brace, sit between your hips, keep the whole foot down.

  2. Barbell bench press

    3 × 8 to 12

    Rest 1 min 30 s · RPE 7, about 3 reps in reserve

    Shoulder blades back and down, press without letting your elbows flare wide.

  3. Barbell row

    3 × 8 to 12

    Rest 1 min 30 s · RPE 7, about 3 reps in reserve

    Pull with your elbows, keep your chest up, squeeze before lowering.

  4. Romanian deadlift

    3 × 8 to 12

    Rest 1 min 30 s · RPE 7, about 3 reps in reserve

    Push your hips back, keep the bar close, stop when your hamstrings tighten.

  5. Cable crunch

    3 × 10 to 12

    Rest 1 min · RPE 7, about 3 reps in reserve

    Exhale as you brace, keep your ribs and hips stacked.

Warm up for 5 to 8 minutes, then start with the heaviest lift of the day.

Full body B

Full body
About 39 min
  1. Romanian deadlift

    3 × 8 to 12

    Rest 1 min 30 s · RPE 7, about 3 reps in reserve

    Push your hips back, keep the bar close, stop when your hamstrings tighten.

  2. Standing overhead press

    3 × 8 to 12

    Rest 1 min 30 s · RPE 7, about 3 reps in reserve

    Ribs down, press overhead without leaning back.

  3. Lat pulldown

    3 × 8 to 12

    Rest 1 min 30 s · RPE 7, about 3 reps in reserve

    Start from a dead hang, drive your elbows down, keep your shoulders controlled.

  4. Walking lunge

    3 × 8 to 12

    Rest 1 min 30 s · RPE 7, about 3 reps in reserve

    Take a long step, stay tall, let the back knee travel down.

  5. Cable crunch

    3 × 10 to 12

    Rest 1 min · RPE 7, about 3 reps in reserve

    Exhale as you brace, keep your ribs and hips stacked.

Warm up for 5 to 8 minutes, then start with the heaviest lift of the day.

Who this plan is for

  • You want every session to name the movement, the sets, the reps and the rest.
  • You train at a gym, with dumbbells at home, or with bodyweight only.
  • You can commit to 2 to 6 days a week and 30 to 90 minutes a session.

How to adjust it

  • Fewer days? The builder switches to a shorter split and keeps weekly volume sensible.
  • Only dumbbells or a floor? Every movement has a version for your equipment.
  • New to lifting? Beginners get linear load and a deload every 4 weeks.

Strength training workout plan: why this works

The split follows your week

Two or three days suits full body, four suits upper lower, and five or six adds a push pull legs structure.

Progression is written down

Beginners add a small amount of weight. Everyone else adds reps first, then weight.

Deloads are scheduled

Every 4 weeks the sets drop and the effort eases, so the next block starts fresh.

The split, session by session

Every muscle group twice a week, with a day of rest in between.

  • Full body A

    5 movements · about 39 minutes

    Back squat, Barbell bench press, Barbell row, Romanian deadlift, Cable crunch

  • Full body B

    5 movements · about 39 minutes

    Romanian deadlift, Standing overhead press, Lat pulldown, Walking lunge, Cable crunch

How it progresses

  • Linear load. Add a small amount of weight each build week while the reps stay the same.
  • Main lifts work in the 8 to 12 rep range, with 90 seconds of rest on the heaviest sets.
  • Every 4 weeks is a deload: two sets per movement at about 60% of your working weight.
  • Peak week: 30 working sets, then the plan eases back before the next block.

Strength training workout plan FAQ

How many days a week should I strength train?

Two days a week builds strength for most people, three to four is the sweet spot for muscle, and five or six suits experienced lifters with the recovery to match. This sample uses 2 days.

What equipment do I need?

Nothing beyond what you choose. This sample uses a full gym, and every exercise lists the same movement for the other setups.

How long are the sessions?

About 39 minutes including a warm up. The first session has 5 movements, and the builder trims sets to fit the time you pick.

How does the plan progress?

Beginners add a small amount of weight each week. Intermediate and advanced lifters use double progression: add reps until the top of the range, then add weight and start again.

What is a deload?

A lighter week every 4 weeks with two sets per movement at about 60% of your working weight. It is where adaptation catches up before the next block.

Is the plan free?

Building it is free: you see the split, the weekly sets and the first two weeks in full. Every session plus the PDF and calendar export unlock with a one-time payment, either for that plan or for lifetime access, which also covers the running plans.

What you get for free

Free, with no signup: the plan outline with your split, weekly sets and every session title, plus the first 2 weeks day by day. Start for free to see yours, then unlock every session, the PDF and calendar sync when you are ready. Pay once, with no subscription.

Related strength plans

Not sure how many days to train? Read how to choose a workout split before you build.

Run as well as lift? Strength training for runners fits two sessions around your running week.